The Pass Through design allows UTP cable wires to pass through the RJ45 connector, which allows us to assemble and crimp a connector more efficiently, minimizing errors caused by poor assembly.
RJ45 Pass Through
You can find these connectors in categories 5e and 6, complying with the TIA-568B.2 standard.
These types of connectors allow for better organization of the wires and the cable jacket within the connector. Although it is an improvement in crimping UTP cables, it has a disadvantage since conventional crimping tools are not suitable for this solution.
For Pass Through connectors, a crimping tool with a blade at the end of the connector is required. The function of the blade is to cut the excess wires and properly crimp the connector.
Crimping tool for RJ45 Pass Through connectors
RJ45 Pass Through connectors save a lot of time in structured cabling projects, helping us significantly reduce errors caused by improper crimping of the connector.
Find the complete solution for structured cabling at Incom.
